In a garden not so far away, I was sitting there wishing lockdown was over. Looked over at my pallet pile. And from the pile I have seen what could be a wishing well.
I cut up pallet slats at 30cm long with the supports at 90cm. Now I didn’t care for defects in the wood like old nail holes splits in the wood etc… As I wanted this to look rustic like someone built it with scrap bits off the wood. So the roof is off and slats are uneven.
Once I fixed it all together I then torched the wood. Again the effect isn’t perfect on each slat as the grains are all different but I don’t want it perfect I want it rough looking.
Read Little Pallet Wishing Well Project by SteveSyme on 1001 Pallets!