After pulling the pallets apart, I put them through the thickener so all the pallets were the same size. I then worked out how high I wanted to go and as the stingers were 1100, I decided that I would utilize that height. I measured the larger tools for the width and depth.
I then used a number of pallets for the body and placed each tool on the shelve above to give me height and where each electrical tool was being placed. On completion, I used MDF for the doors, and put a bolt on the doors so they can be locked. I left it raw as I liked the look.
Read Pallet Tool Cabinet by derzsi on 1001 Pallets!