Clik here to view.
Diy – Backyard Pallet Planter Box
I hope that everyone has been safe and well during this pandemic and that you have found ways to stay busy and sane. This situation of confinement and working from home has given me the opportunity to...
View ArticleClik here to view.
Pallet Crafter Interview #23: Michael Martin
Today, we had the chance to ask some questions to Michael Martin who build beautiful home décor and furniture out of recycled wood pallets. If you think you deserve to be featured in the next...
View ArticleClik here to view.
Pallet Treehouse
We’ve created a magical place. From the used pallets and wood that we found in nature, we made a treehouse. Places for meditation, rest but also for fun. Respecting the tree and nature. Being on a...
View ArticleClik here to view.
Garden Planter From One Single Pallet
After pulling wood pallets apart, I put them through the thickener/planer before putting each panel long sides onto side supports, which are made of ripped down stringers. I then screwed the side...
View ArticleClik here to view.
Simple Pallet Planter
The purpose of this little project was to use up some pallet strips that I had leftover. Ideal for lettuce, spring onions etc… I worked out how best to cut the planks so there was zero waste. Looks...
View ArticleClik here to view.
The Pallet Mud Kitchen I Made for My Niece
I used a whole pallet for the upright section then cut a pallet in half for the worktop and underneath section. Once I fixed it all together, I torched it all with a blow torch with the Shou Sugi Ban...
View ArticleClik here to view.
Pallet Bird Table
I selected some good planks of similar length and glued them together. Before doing this I ran them through the saw bench just to kiss the short edge to give them a better chance of bonding with the...
View ArticleClik here to view.
Pallet Dog Bed – 3 Days in the Making!
My wife’s daughter tasked me with making a bed for her new puppy! Ok, so after stripping several pallets for planks I ran them through the saw bench just to kiss the edges. Sand all around with 60...
View ArticleClik here to view.
Rustic Bar with Pallet Bar Stools
This Bar Set was created for Joey, Maria, and Family. The barstools and bar trims were made from recycled wood pallets. It was a very fun project. All pallets were cut to size and sanded to a smooth...
View ArticleClik here to view.
A Couple of Pallet Bird Feeders
I Had some plastic bird houses and they ended up getting broke or just wearing out so I figured I could make some out of pallet wood like everyone else does. I made these 2 bird feeders using leftover...
View ArticleClik here to view.
Pallet Tool Cabinet
After pulling the pallets apart, I put them through the thickener so all the pallets were the same size. I then worked out how high I wanted to go and as the stingers were 1100, I decided that I would...
View ArticleClik here to view.
Rustic Pallet Ice Chest
This ice chest was created from 2 wood pallets. I cut the two pallets down and I sanded them a little, I didn’t want to remove too much wood characters. I measured my ice chest and off I went I...
View ArticleClik here to view.
Pallet Coolers
Nice and easy cooler, perfect for a hot day! The bases are made of pallet wood but I had to buy some pine wood and varnish also. Read Pallet Coolers by Neokentin on 1001 Pallets!
View ArticleMake Trivets from Pallet Wood
Today we are making some trivets – ever wonder what those boards that you use to protect your table from hot pots? Well, I just googled it and found out what the correct term is: Trivet. I just wishes...
View ArticleClik here to view.
Pallet Wine Caddy
After pulling apart a pallet and using it to make various items I found I had a heap of left over scraps just waiting to be made into something. The base is 12 inches long as are the internal sides....
View ArticleClik here to view.
How I Made This Pallet Wardrobe
It’s not always necessary to buy a new wardrobe, with a little bit of effort you can make your own. From my point of view, a wardrobe is like a chair. It must fit your specific needs (dimensions). To...
View ArticleClik here to view.
Pallet Birdhouses
Two planks glued to form a board 6′ or 150mm was the basis for all of these birdhouses. I used 6 pallet planks in all. The flat roof house is hinged on the back and the other two have to lift off...
View ArticleClik here to view.
Bee Hostels from Pallet Wood
Not much to say really, I just randomly built these two. If you have read any of the other projects I have done (bird table, bird box, dog bed), I used the same method of cleaning up the edges of the...
View ArticleClik here to view.
Pallet Crescent Moon Cradle
To build this moon cradle, I used a pine 1×3 slats throughout and MDF board for the frame. I used pegboard for the mattress decking and brad nails 1 5/8″, 1″, 1 1/4″. Download your free PDF plans to...
View ArticleClik here to view.
Reclaimed Pallet Wood Coffee Table
My first coffee table with a design. Wanted to build something with a design for a while. Finally decided to come up with this coffee table from scrap wood and pallets. Not having a plan in place just...
View Article